 |
 |
 |
|
NEW PrePackaged Power Tool Kit contains EVERYTHING you need to get to work: motor, speed control, handpiece, motor hanger and accessories. It is the same as K.TX300, except also includes the new MAMH-1 Motor Hanger. This is the Foredom’s most powerful flex shaft machines with 1/3HP. They have permanent magnet DC motors that feature the latest in flex shaft technology. These ball bearing models utilize advanced rare earth magnets (in place of the wound fields in our universal type Series SR motors) that deliver more torque at the low end and throughout the entire speed range of 500 to 15,000 RPM. No other flex shaft gives you greater control of the cutting tool, drill, or bur under any load. It comes equipped with a motor bale for hanging, and our standard 39" long key-tip inner shaft and outer sheath for connecting to any of Foredom’s 19 “interchangeable” handpieces. Motor and Speed Control carry. 2 Year Limited Warranty. MADE IN USA.
- Foredom Flexshaft K.TX 301
Components:
1.- Series TX Motor:
Foredom’s most powerful flex shaft machines with 1/3HP. They have permanent magnet DC ,
speed range of 500 to 15,000 RPM.
Foredom’s permanent magnet motors require the use of a C.TXR, C.SXR, or C.EMX speed control.
Damage will result if the motor is connected to any other speed control.
2.- C.TXR Speed Control:
The C.TXR features solid state circuitry in a heavy duty plastic housing with an extra wide footprint,
low profile, and non-skid pads on the bottom. 7" long, 4-1/2" wide,
2-3?8" high, ship wt– 2 lbs./1 kg.
3.- H.30 Handpiece:
3-jaw, geared chuck with a 0-5/32" capacity.
4.- HPCK-0 Chuck Key in molded plastic handle for changing accessories.
5._ AK11 Accessory Kit (see Kit K.TX300 for listing of contents):
43 pc. assortment of professional jewelers/metal working accessories
6.-Flexible shaft grease and spare motor brushes.
7.- MAMH-1 Motor Hanger:
A 3-piece hexagonal support rod,
Assembly of the hanger is simple with the supplied couplings and set screws.
- Accessory Kit AK11
- consists of the following (we reserve the right to substitute comparable accessories when needed):
- 1 Rotating Bur Holder 3/32" w/cup
- 1 Platinum White, 1" Tube
- 6 Radial Bristle Disc, 3/4" dia., Pink, Pumice (1,200 Grit), Pack of 6
- 3 Purple Ceramic Sanding Bands, 1/4" x 1/2", 60 grit
- 3 Purple Ceramic Sanding Bands, 1/4" x 1/2", 80 grit
- 3 Purple Ceramic Sanding Bands, 1/4" x 1/2", 120 grit
- 3 Purple Ceramic Sanding Bands, 1/4" x 1/2", 220 grit
- 1 Satin Finish Scotch-Brite, Red, Fine, 7/8" dia. x 1/4" thick,
- Mounted with 3/32" Shank
- 1 Satin Finish Scotch-Brite, Tan, Coarse, 7/8" dia. x 1/4" thick,
- Mounted with 3/32" Shank
- 1 Rubber Bonded Abrasive, Brown, Wheel, 7/8" dia. x 1/8" thick with
- 1/16" Arbor Hole, Coarse, 40-60 Grit
- 1 Rubber Bonded Abrasive Wheel, 7/8" x 1/8", 120 grit (black)
- 1 Rubber Bonded Abrasive Wheel, 7/8" x 1/8", 180 grit (green)
- 1 CW Polishing Wheel, Orange, 7/8" x 1/8", 500 grit,
- 1 CW Polishing Wheel, Gray, 7/8" x 1/8", 1000 grit,
- 1 CW Polishing Wheel, White, 7/8" x 1/8", 1500 grit,
- 1 CUT-OFF DISC, 1-1/4" Fiberglass
- 1 FELT BUFF, Unmounted 5/8"
- 1 Mandrel, 3/32" shank & 1/16" arbor hole
- 1 Mandrel, LGE HD. 3/32 X 1/16
- 1 Mounted Brush, Cup, Bristle, 3/32" shank
- 1 Mounted Brush, Wheel, Bristle Stiff, 3/32" shank
- 1 Mounted Brush, End, Bristle, 3/32" shank
- 1 Mounted Brush, End, Brass, 3/32" shank
- 1 Mounted Brush, Wheel, Brass, 3/32" shank
- 1 High Speed Vanadium Steel Fluted Engraving Bur, 3/32" shank
- 1 High Speed Vanadium Steel Fluted Engraving Bur, 3/32" shank
- 1 High Speed Vanadium Steel Fluted Engraving Bur, 3/32" shank
- 1 High Speed Vanadium Steel Fluted Engraving Bur, 3/32" shank
- 1 Rubber Sanding Drum Mandrel, 1/4" x 1/2", 3/32" shank
|
|
|
 |
|
 |
|
